| |
|
 |
| |
| |
|
 |
| Code : |
Gecqo Raingard R
|
| |
A decorative, liquid-applied membrane of heavy acrylic polymer gel. It is reinforced with fiberglass mat during
application for maximum strength and durability.
|
| |
-Durability, Excellent film tensile strength and long durability.
-Flexibility which enables it to bridge hairline and minor cracks.
-Trafficability, regular maintenance foot and light-wheeled traffic.
-Chemical resistance, a wide range of common pollutants and diluted chemicals.
-Beautiful colors , a selection of colors to match the exterior finishes of buildings
-Fire resistance, it has achieved fire resistance rating of AS 1530 Pt 3.
-Easy to apply, saving time and labor cost.
-Cost effective, it can be applied directly over leaking panel-roofing system without the need to remove the concrete panels.
-Easy to maintain, Normal in-service cleaning can be carried out by mopping or low pressure washing to maintain a clean.
|
| |
|
|
 |
 |
| Code : |
Gecqo Raingard W
ACRYLIC POLYMER
|
| |
A high-build, heavy-duty, flexible and elastomeric waterproofing system for walls. It is especially designed for exterior
Use a variety of conditions.
-Waterproof, seals porous substrates such as hollow blocks, bricks, plastered walls as well as concrete with resistance
to sunlight and weathering.
-Flexibility , a highly flexible coating system. It can be bridge small cracks.
-Vapour permeability which allows it to breathe thus permitting trapped moisture vapour to escape into the atmosphere.
-Durability, it is recoatable thus increasing its life span.
-Beautiful colors , a selection of colors to match the exterior finishes of buildings
-Protective , it has good impact, fungi and algae resistance.
-Anti-carbonation protection, provides protection against concrete carbonation.
-Decorative, a wide range of decorative and aesthetic colors.
|
|
|
 |
| Code : |
Gecqo 007 Seal |
| |
Cement base 2 Component ( Polymer modified Waterproofing System )
|
| |
A two component cementitious waterproofing system that offers an effective and permanent waterproofing solution
to concrete structures, a special blend in powder form, is used as a waterproofing system that provides an effective barrier against moisture for walls, ceilings and floors.
-Permanent because the crystals become an essential part of the concrete structure.
-Waterproofs concrete deeply due to the expansion of insoluble crystals in the capillary system.
-It is normally applied on the active side, but it is as effective if applied on the opposite surface.
-Non-toxic thus recommended for water tanks and food containers.
-Increase concrete’s resistance to frost, weathering, salt water, aggressive ground water and many chemicals.
|
|
|
 |
| Code : |
Gecqo 111
|
| |
A cementitious waterproofing systemconsisting of cement, quartz sand and multiple activating chemicals. It can be used either exposed or concealed for basement walls, floors, swimming pools, bathroom, lift pits, etc.
-Permanent because the crystals become an essential part of the concrete structure.
-Waterproofs concrete deeply due to the expansion of insoluble crystals in the capillary system.
-It is normally applied on the active side, but it is as effective if applied on the opposite surface.
|
|
|
 |
| Code : |
Gecqo 180
|
| |
A two component cementitious waterproofing and protective membrane. Owing to its composition of cement, quartz sand and a special blend of chemical ingredients of an inorganic nature.
-It can be used against active or passive water pressure.
-Excellent adhesion and high tensile strength.
-It can be easily applied to both horizontal and vertical surfaces.
|
|
|
 |
| Code : |
Gecqo Flex
|
| |
A single component, liquid applied, elastomeric waterproofing membrane based on highly elasticorganic polymers.
-No bitumen no bitumen or coal tar and will not cause staining to marble, ceramic tiles or tile grouts.
-It has more than 800% elongation and non-flammable, non-toxic.
-It can be reinforced with fibreglass mat for extra strength in areas where high stress may be encountered and therefore eliminates potential failure due to poor joints.
|
|
|
 |
| Code : |
Fiber Glass |
| |
It is formed with a very tough glass fiber to reinforce wear and tear resistance.
- Fiber glass Net
- Fiber glass Chopped Stand Mat
- Fiber glass Hard Net
- Polyester
|
|
|
 |
| Code : |
Gecqo 3
Gecqo 4
TORCHED-ON WATERPROOFING SYSTEM |
| |
A torched-on waterproofing membrane, is based on a distilled bitumen compound modified with APP plastomeric
polymers. It is reinforced with interlaid spun bonded polyester.
- Polyester reinforced
Increases strength and prevents membrane winking during application
- Temperature resistant
Withstands high and low temperatures and temperature fluctuations.
- Cost effective
Provides an economical and cost effective waterproofing method.
- Durability
Resistant to bacteria, mold, perforation and tearing. Excellent elongation and strength.
- Low flammability
Resistant to flame and radiating heat
|
|
|
 |
| Code : |
Gecqo Sticker
SELF ADHESIVE WATERPROOFING MEMBRANE |
| |
A self adhesive bituminous/asphalt membrane for all types of waterproofing requirements.
- It is protested by a cross laminated high density polyethylene film giving it a unique combination of mechanical and
physical properties such as high resistance to acids, alkalis and pollutants.
- Exhibits a self sealing action if it is punctured by nails or accidentally cut, the membrane will re-seal on contact and
maintaining water tightness.
- It is ideal for the waterproofing of both concrete and wooden structures such as roofs, decks, patios, insulated roofs,
inverts roofs, bridges and viaducts, foundation and retaining walls etc.
- No heat is needed during installation making.
- It ideal for application in areas where hot sealed membranes cannot be used such as over heat sensitive materials
and in confined areas.
|
|
|
 |
| Code : |
Gecqo Super Hard
LITHIUM SLICATE CONCRETE HARDENERS AND DENSIFIERS
|
| |
Super Hard, with the maximum lithium content is the premium sealer, hardener and densifier for concrete. This patented lithium silicate treatment deeply penetrates and reacts with the concrete to produce insoluble calcium silicate hydrate within the concrete pores. Treated surfaces resist damage by water, chemical attack, erosion or surface abrasion. The surface sheen imparted by Super Hard reduces dusting and simplifies maintenance producing a cleaner, healthier environment. Super Hard will also provide extended coverage rates in comparison to Gecqo Hard and other conventional sodium or potassium silicate hardeners. Safer and easier to apply than conventional sodium or potassium silicate hardeners, Super Hard will not activate or contribute to surface ASR ( Alkali Silicate Reaction )
|
|
|
|
|
|
|
|
|
